That probably explains why something like that shows up on the output of lspci when almost everything else (including lenovo's spec sheet[1]) points to the machine not having amt.
For reference this is a lenovo e560 and this is what I get from lspci regarding the communications controller: 00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21) Subsystem: Lenovo Device [17aa:5048] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 127 Region 0: Memory at e134b000 (64-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee002f8 Data: 0000 Kernel driver in use: mei_me Kernel modules: mei_me
I guess this is one of those times when one is happy not to have certain functionalities.
Power management, mobile and firmware developer on Linux. Security developer at Aurora. Ex-biologist. mjg59 on Twitter. Content here should not be interpreted as the opinion of my employer. Also on Mastodon.
![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
Re: How do I know if I have it enabled
Date: 2017-05-02 05:42 pm (UTC)For reference this is a lenovo e560 and this is what I get from lspci regarding the communications controller:
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: Lenovo Device [17aa:5048]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 127
Region 0: Memory at e134b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee002f8 Data: 0000
Kernel driver in use: mei_me
Kernel modules: mei_me
I guess this is one of those times when one is happy not to have certain functionalities.
[1] http://psref.lenovo.com/syspool/Sys/PDF/ThinkPad/ThinkPad%20E560/ThinkPad_E560_specs.pdf